| CAS No. | Name | Category | Project | Application |
|---|---|---|---|---|
| 308080-99-1 | Molecular sieves | Petrochemicals | commerical | 1.Gas Drying: Deep dehydration for cracked gas, ethylene, propylene, natural gas, acetylene; inhibit corrosion and side reactions. 2.Liquid Drying: Dehydration of polar solvents (methanol, ethanol), refrigerants and jet fuel. 3.Drying for Sealed Systems: Moisture control for insulated glass and insulators. 4.Separation of Mixed Systems: Selective removal of small molecules including water and ammonia. |
| 70955-01-0 | MOLECULAR SIEVES PACK 4A | Petrochemicals | Commercialization | 1. Deep drying of gases and liquids: Used for dehydrating and drying media such as air, natural gas, alkanes, and refrigerants; effectively adsorbs molecules smaller than 4 Å in diameter 2. Gas separation: Can be used for argon purification and for removing impurities during air separation processes for oxygen and nitrogen production 3. Liquid Purification: Used for dehydrating organic solvents (such as ethanol and acetone), in detergent additives, and for water softening to remove calcium and magnesium ions 4. Industrial Catalytic Support: Used as a catalyst or catalyst support for adsorption-catalyzed reactions in the petrochemical and fine chemical industries Translated with DeepL.com (free version) |
| 12173-28-3 | Molecular sieve 13x | Petrochemicals | Commercialization | 1. Gas drying and purification: Used for deep dehydration of industrial gases such as air, natural gas, and liquefied petroleum gas (LPG), while also removing acidic impurities such as carbon dioxide and hydrogen sulfide 2. Feed gas pretreatment in the air separation industry: Removes moisture and carbon dioxide from air to prevent equipment freezing and blockages during low-temperature distillation 3. Liquid hydrocarbon refining: Removes sulfides, nitrogen compounds, and trace moisture from petroleum products such as gasoline, kerosene, and diesel to improve product quality. 4. Pharmaceutical and chemical industries: Serves as a catalyst support and adsorption separation medium for the purification and separation of organic compounds. |
| 7440-50-8 | Copper-based Oxygen Absorbent | Petrochemicals | Commercialization | Used for deep deoxygenation of petroleum, natural gas, nitrogen, hydrogen and other industrial gases, remove trace oxygen in gas stream. |
| / | Metallocene Catalyst | Petrochemicals | Commercialization | Used as single-site catalyst for polymerization of ethylene, propylene and other α-olefins, to produce metallocene polyethylene(PE), polypropylene(PP), POE and other high-performance polyolefin materials. |
| 97-93-8 | Triethylaluminum | Petrochemicals | Commercialization | Used as co-catalyst for Ziegler-Natta olefin polymerization, applied in PE, PP, synthetic rubber production; also used as alkylating agent in organic synthesis. |
| 100-99-2 | Triisobutylaluminum | Petrochemicals | Commercialization | Used as co-catalyst of Ziegler-Natta catalyst system for olefin and diene polymerization, applied in polypropylene, polybutadiene, synthetic rubber production; also used as reducing agent and alkylating agent in organic synthesis. |
| 108-95-2 | Phenol | Petrochemicals | Commercialization | Important organic chemical intermediate, widely used for the production of bisphenol A, phenolic resin, caprolactam, salicylic acid, etc. Applied in petroleum, chemical, pharmaceutical and pesticide industries. |
| 298-12-4 | Glyoxylic acid | Petrochemicals | Commercialization | Important organic intermediate, widely used for synthesis of vanillin, ethyl vanillin, allantoin, pharmaceuticals, pesticides, dyes and fine chemicals, also applied in petroleum and daily chemical industry. |
| 9003-07-0 | Polypropylene | Petrochemicals | Commercialization | General polyolefin plastic, widely used for injection molding, extrusion, fiber spinning; manufacture of plastic parts, packaging film, non-woven fabric, pipe, automotive components, textile and daily consumer goods. |
| 9003-07-0 | Homopolymer | Petrochemicals | Commercialization | Homopolymer PP is produced from propylene monomer alone. It has high rigidity, good heat resistance and tensile strength. Widely used for injection molding, fiber spinning, sheet extrusion, for woven bags, nonwovens, food containers, household goods and automotive interior parts. |
| 25038-59-9 | Polyethylene Terephthalate | Petrochemicals | Commercialization | High-performance thermoplastic polyester resin. Widely used for bottle grade packaging, fiber spinning, film production, engineering plastic, food packaging bottles, textile fibers, industrial films and sheet materials. |
| 24937-79-9 | Suspension Resin | Petrochemicals | Commercialization | Prepared by suspension polymerization. Suitable for extrusion, injection molding and compression molding. Used for pipe fittings, sheets, rods, chemical anticorrosion parts and membrane substrates. |
| 24937-79-9 | Dispersion Resin | Petrochemicals | Commercialization | Produced by dispersion polymerization. Suitable for coating, dipping, film casting and membrane making. Widely used for anti-corrosion coating, lithium battery separator coating and separation membrane raw materials. |
| 24937-79-9 | Concentrated Dispersion | Petrochemicals | Commercialization | Used for coating, impregnation and film preparation. Widely applied in lithium battery separator coating, metal anti-corrosion coating, fabric coating and separation membrane production. |
| 9002-84-0 | PTFE Micropowder (Polytetrafluoroethylene Powder) | Petrochemicals | Commercialization | Used as additive for engineering plastics, coatings, inks, lubricants and grease. It can improve wear resistance, sliding property, anti-sticking and corrosion resistance of materials, widely used in plastic modification, paint and lubrication industries. |
| 9002-84-0 | Anti-dripping Agent | Petrochemicals | Commercialization | Flame retardant auxiliary additive for PC, PC/ABS, PBT and other engineering plastics. It prevents molten material dripping during combustion, improves flame retardancy, widely used in electronic and electrical plastic parts. |
| 31175-20-9 | Perfluorosulfonic Acid Resin (PFSA Resin) | Petrochemicals | Commercialization | Used as proton exchange material and solid superacid catalyst. Widely applied in fuel cells, water electrolyzers, flow batteries, chemical catalysis, gas separation and sensor manufacturing. |
| 26007-43-2 | Optical Grade COP Resin (Cyclo Olefin Polymer) | Petrochemicals | Commercialization | For precision injection molding of optical components. Features high transmittance, low birefringence and ultra-low water absorption. Widely used in camera lenses, laser f-theta lenses, AR/VR optical elements, optical sensors and medical microfluidic chips. |
| 26655-00-5 | Meltable Polytetrafluoroethylene (PFA, Perfluoroalkoxy) | Petrochemicals | Commercialization | Suitable for injection molding, extrusion and blow molding. Used for semiconductor ultra-pure pipeline, valve fittings, chemical anti-corrosion linings, high-temperature cable insulation, medical equipment and non-stick coating. |
| 25067-11-2 | Fluorinated Ethylene Propylene (FEP) | Petrochemicals | Commercialization | Suitable for extrusion, injection molding and coating. Widely used for high-temperature wire and cable insulation, chemical anti-corrosion lining, non-stick coating, semiconductor parts and film products. |
| 9010-75-7 | FEVE Fluorocarbon Resin (Fluoroethylene Vinyl Ether Copolymer) | Petrochemicals | Commercialization | Used for preparing long-life fluorocarbon coatings. It can be cured at ambient temperature. Widely applied in architectural metal panels, bridge anti-corrosion coating, marine equipment, wind power, solar backsheet and heavy-duty industrial anti-corrosion coatings. |
| 1271-28-9 | Nickelocene / Bis(cyclopentadienyl)nickel(II) | Petrochemicals | commerical | |
| Total: | 23 | |||